Specify more than the count
| Construction field | Information to provide |
|---|---|
| Wire and strand count | Number of wires and individual diameter |
| Geometry | Actual cross-section, finished diameter and lay |
| Material | Conductivity class and wire condition |
| Electrical | Maximum resistance and stated temperature |
| Mechanical | Required load, elongation and test basis |
Make a defined comparison
For conductors made from the same material, changing both wire diameter and strand count changes the geometry. Count alone cannot identify which conductor has lower resistance or greater current capacity.
Compare actual dimensions, measured resistance and complete mechanical behavior. Installation, heating, fault duty and connections need their own acceptance criteria.
Connect the drawing to the test record
- Provide the conductor drawing or construction reference
- Agree on sample and finished-conductor test requirements
- Specify connectors, environment and installation duty
- Confirm packaging, traceability and current supply terms
This guide supports initial specification review. Confirm current product data, availability and application acceptance for the exact conductor under consideration.